Better hot tubs-great soaking prices

TYPES OF HOT TUBS

SHEDS & OTHER PRODUCTS

Available Through the U.S.

Steel Shed Kits

YOUR IDEAS ARE INVITED!
Please email us at anytime with comments, suggestions, questions.
We'd love to hear from you!

How To Set Up a Spa To Go


Unfold Spa 2 Go Liner into a flat position.	Use inflator hose. Connect to power pack on the air blower side (right) to inflate spa. Inflate three valves plus interior floor.

Connect all three power pack fittings to spa. Then fill with garden hose. Hand Tighten only.	Fill inflatable insulation bladder with inflator hose

Place inflatable insulation bladder over spa. Push all sides down to fit tight.	Place top over spa then line up 8 cover locks. Release valve on filter housing after initial fill to release any trapped air. This will be completed when water begins to trickle from the valve. Immediately close valve and plug unit it. turn thermostat to the highest position and allow approximately 24 hours for the spa to reach it's desired temperature.

BetterHottubs.com | Post Office Box 995 | Carbondale, CO 81623 | United States of America | 970-963-0679